SpartanLync Technologies

Bluetooth tire monitoring for travel trailers

Know every tire. Every mile.

Spartan RV TPMS gives you a clear view of tire pressure, temperature, leak, battery, and missing-sensor conditions on Android and iOS. Key status information is also available through Android Auto and Apple CarPlay in supported vehicle-display environments.

Explore the app Get support
Android & iOS Android Auto & Apple CarPlay Bluetooth Low Energy Single, dual & triple axle
Spartan RV TPMS app icon
Actual Spartan RV TPMS triple-axle home screen on Android showing seven active tire sensors and live readings Actual app screen

Built for the road ahead

Important tire information, without the clutter.

Each paired sensor is shown in its real position around a familiar top-view trailer, so the tire that needs attention is easy to identify.

Live pressure and temperature

View the latest reading for each paired tire using PSI or kPa and Fahrenheit or Celsius.

Fast-leak alerts

Receive a clear safety alert when rapid pressure loss is detected.

Simple trailer profiles

Choose a single-, dual-, or triple-axle layout and optionally monitor a spare tire.

Temperature protection

A fixed high-temperature warning activates at 85°C (185°F) for consistent safety behavior.

Background monitoring

Platform background Bluetooth support helps monitoring continue when the phone screen is off.

Guided setup

Ready in four clear steps.

The app keeps configuration focused and pairs one sensor at a time.

Choose your trailer

Select the axle configuration that matches your RV.

Pair each sensor

Tap a tire position, start pairing, then briefly release air to activate that sensor.

Set baseline & units

Enter the cold tire pressure shown on your trailer or tire placard.

Finish and monitor

Confirm the setup and see live readings for every paired position.

During setup: readings continue to update, while audible alerts remain quiet. After setup is saved, a one-minute quiet period gives you time to finish handling the tires before sounds begin.

Help inside the app

The question-mark button keeps guidance close.

Tap the circled ? in the top-right corner of the home screen to open the centered Help & Support menu. Every app image in this section was captured from the current Spartan RV TPMS Android build running on a physical phone.

No account or web search is needed. Core safety behavior, pairing help, support contact details, and the installed app version are available from this menu.

App Behavior

Explains tire status colors, alert thresholds and repeat timing, missing-sensor handling, the one-minute post-setup quiet period, battery warnings, and background monitoring.

Support & Help

Shows pairing guidance plus the SpartanLync support email and company website.

About

Identifies SpartanLync Technologies, the Spartan RV TPMS product, its purpose, and the installed app version.

Mute alert sounds

The speaker button beside the question mark mutes or restores audible alert sounds. Muting sound does not disable live sensor updates, tire colors, in-app warnings, phone notifications, background monitoring, or vehicle-display status.

Manage Sensors

Open Settings → Manage Sensors to pair, unpair, or change a tire sensor and to add or remove the optional spare. Normal monitoring pauses while this screen is open; only the 30-second scan started for the selected tire runs, and only one sensor can be paired at a time.

Set Baseline / Units

Open Settings → Set Baseline / Units to choose PSI or kPa, choose °F or °C, and save the manufacturer-recommended cold inflation pressure for the axle tires and optional spare. Alert thresholds are calculated automatically from the saved baseline.

Actual Spartan RV TPMS Help and Support menu opened from the question-mark button
Question-mark menuApp Behavior, Support & Help, and About in one place.
Actual Spartan RV TPMS App Behavior screen showing tire status thresholds
App BehaviorClear, in-app explanations of warning and critical conditions.
Actual Spartan RV TPMS Support and Help screen with email and website
Support & HelpPairing instructions and direct SpartanLync contact details.
Actual Spartan RV TPMS Settings screen with Set Baseline and Units, Manage Sensors, and Factory Reset controls
SettingsReview or change the saved trailer configuration without repeating first-time setup.
Actual Spartan RV TPMS Manage Sensors screen showing tire-position pairing controls
Manage SensorsPair or unpair the sensor assigned to each exact tire position.
Actual Spartan RV TPMS baseline pressure and display unit setup screen
Baseline & unitsChoose display units and enter the correct cold inflation pressure.
Actual Spartan RV TPMS App Behavior screen explaining mute, background monitoring, and Android Auto
Mute and background behaviorThe in-app explanation confirms that mute affects sound only. Live tire colors, warnings, phone notifications, background monitoring, and Android Auto status remain active.

Warning conditions

Pressure at least 12.5% below or 25% above baseline, temperature at or above 85°C (185°F), battery at 50% or below, or a missing sensor.

Critical conditions

Pressure at least 20% below or 30% above baseline, or a detected fast leak. The app tells the user to stop safely and inspect the tire.

Setup quiet period

Live readings continue during setup and for one minute after Finish Setup. Only sounds, vibration, and alert popups are suppressed; tire status remains visible.

Compatibility

Designed for Android phones and tablets, iPhone, and iPad.

Spartan RV TPMS communicates directly with compatible Bluetooth Low Energy tire sensors. No account or cloud connection is required for core monitoring.

Mobile devicesAndroid 9 or newer phones and tablets, plus supported iPhone and iPad devices, with Bluetooth Low Energy
RV profilesSingle-, dual-, and triple-axle travel trailers, with optional spare
Vehicle displayAndroid Auto is supported by the Android version, and Apple CarPlay is supported by the iOS version. Availability depends on the phone, vehicle display, and platform configuration.
ConnectionCompatible SpartanLync TPMS sensors via Bluetooth Low Energy
Actual Spartan RV TPMS Android Auto screen showing live pressure and temperature for three axles
Live Android Auto testCaptured from the connected physical Android phone in Google’s Desktop Head Unit. The vehicle display shows the same configured tires, units, readings, and status as the phone.

Safety notice

Spartan RV TPMS is a supplemental monitoring aid. It does not replace routine tire inspection, correct inflation, or safe driving. Never interact with a phone while driving. If an alert occurs, pull over safely before inspecting the tire.

1. Who we are

Spartan RV TPMS is provided by SpartanLync Technologies (“SpartanLync,” “we,” “us,” or “our”). This policy explains how the app handles information and device permissions.

2. Information handled by the app

On both Android and iOS, the app processes paired tire-sensor identifiers and sensor telemetry such as tire pressure, temperature, battery status, leak state, and last-seen status. It also saves your selected trailer profile, sensor-to-tire assignments, pressure baseline, display units, alert sound preference, setup status, and consent status.

This information is stored locally on your device so the app can monitor the configured tires. SpartanLync does not operate an app account system, advertising service, or analytics service for this app, and the core monitoring function does not transmit tire telemetry or your settings to SpartanLync.

3. Permissions and why they are used

Bluetooth / Nearby devicesOn Android and iOS, this permission discovers, pairs with, and receives data from compatible TPMS sensors.
Location — older Android onlyAndroid 11 and earlier may require location permission—and Location Services enabled—for Bluetooth discovery, including background discovery. This legacy Android requirement does not apply to the iOS app. The app does not read, store, track, or transmit your geographic location.
NotificationsOn Android and iOS, notifications can show monitoring status and tire safety alerts when the app is not open.
Background monitoringAndroid uses a connected-device foreground service. iOS uses Bluetooth background mode. These platform features help monitoring continue when the screen is off or the app is in the background, subject to operating-system restrictions.
CameraUsed only if you choose a QR-code asset-sharing feature. Camera images are not stored or uploaded by the app.
Audio and vibrationPlays and controls the tire-alert sound and vibration behavior.

4. Sharing and sale of data

SpartanLync does not sell or share personal information from this app with advertisers or data brokers. The app does not contain third-party advertising.

5. Data retention and deletion

Locally stored settings and sensor assignments remain on the device until you remove a paired sensor, use the in-app Factory Reset, clear the app’s storage where the operating system provides that option, or uninstall the app. Factory Reset removes the saved RV profile and paired-sensor assignments from the app on Android and iOS.

6. Security

App data is kept in operating-system-protected application storage. Android backup is disabled by the app; iOS backup behavior is controlled by Apple and the user’s device settings. No method of electronic storage can be guaranteed to be completely secure, but we limit handling to the data needed for TPMS operation.

7. Children’s privacy

This app is a vehicle-safety utility intended for adult RV operators and is not directed to children under 13. We do not knowingly collect personal information from children.

8. Changes to this policy

We may update this policy to reflect changes to the app or legal requirements. The effective date at the top of this section identifies the latest version.

9. Contact us

For privacy questions or support, email support@spartanlync.com or visit spartanlync.com.

Help & support

We’re here when you need us.

Include your phone or tablet model, Android or iOS version, app version, and a short description of the issue when contacting support.

Quick pairing help

Open Settings → Manage Sensors, select one tire position, and tap Pair Sensor. When the 30-second scan begins, briefly release air from that tire to wake its sensor. Pair only one tire at a time, then repeat for the remaining positions.

Before driving

Reinstall every valve cap, reinflate each tire to the manufacturer’s recommended cold pressure, and confirm all expected sensors are reporting.